University of Michigan - Shanghai Jiao Tong University Joint Institute

Pages

Morteza Eslamian

Morteza Eslamian

Associate Professor

Office
  413
Tel
  +86-21-34207249
Fax
  +86-21-34206525
Email
  nc.ud1511448448e.utj1511448448s@nai1511448448malse1511448448.azet1511448448rom1511448448
Webpage
  http://pv.sjtu.edu.cn/index.html

Education

Ph.D. Mechanical Engineering, University of Toronto, Toronto, ON (2006)
M.Sc. Mechanical Engineering, Sharif University of Technology, Tehran, Iran (2000)
B.Sc. Mechanical Engineering, Sharif University of Technology/Shiraz University, Iran (1998)

Work Experience

2016 – present Associate Professor (Dual Appointment) in the State Key Lab for Composite Materials, School of Materials Science and Engineering, Shanghai Jiao Tong University
2013 – present Associate Professor, University of Michigan – Shanghai Jiao Tong University Joint Institute, Shanghai, China
2011 – 2013 Assistant Professor, School of Engineering and Computing Sciences, Texas A&M University- Corpus Christi, TX
2008 – 2011 Research Associate, Ryerson University, Toronto, ON
2007.4 – 2007.8 Postdoctoral Research Fellow, Swiss Federal Institute of Technology ETH Zurich, Switzerland
2006 – 2007 Postdoctoral Research Fellow, Department of Chemical Engineering, University of Toronto.
2002 – 2006 Graduate Research Assistant, Department of Mechanical and Industrial Engineering, University of Toronto, ON
2000 – 2002 Research Engineer, Institute for Surface Effect Vehicles, Shiraz, Iran
1998 – 2000 Graduate Research Assistant, Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran

Awards

  • 2014 Oriental Scholar

Book Chapters

  • M. Eslamian and N. Ashgriz, Chapter 2: Powder Production via Spray Route in “Powder Metallurgy Research Trends”, Invited Book Chapter, Nova Science Publishers, New York Editors: Lotte J. Smit and Julia H. Van Dijk. ISBN: 978-1-60456-852-3.
  • M. Eslamian, M. Ahmad and N. Ashgriz, Chapter 40: Powder Production by Emulsion Combustion Spray Method, Handbook of Atomization and Sprays, Theory and Applications”, Springer. (Editor: N. Ashgriz), ISBN: 978-1-4419-7263-7. DOI 10.1007/978-1-4419-7264-4_40.
  • M. Eslamian and N. Ashgriz, Chapter 37: Spray Drying and Spray Pyrolysis, Handbook of Atomization and Sprays, Theory and Applications”, Springer. (Editor: N. Ashgriz), ISBN: 978-1-4419-7263-7. DOI 10.1007/978-1-4419-7264-4_37.
  • M. Eslamian and N. Ashgriz, Chapter 25: Drop-ON-Demand Drop Generators, Handbook of Atomization and Sprays, Theory and Applications”, Springer. (Editor: N. Ashgriz), ISBN: 978-1-4419-7263-7. DOI 10.1007/978-1-4419-7264-4_25.
  • M. Eslamian and N. Ashgriz, Chapter 33: Swirl, T-Type and Vibrating Mesh Atomizers, Handbook of Atomization and Sprays, Theory and Applications”, Springer. (Editor: N. Ashgriz), ISBN: 978-1-4419-7263-7. DOI 10.1007/978-1-4419-7264-4_33.

Journal Publications (Selected)

  • M. Eslamian, Inorganic and Organic Solution-Processed Thin Film Devices, Nano-Micro Letters. 2016, DOI: 10.1007/s40820-016-0106-4.
  • M. Ahmadian-Yazdi, F. Zabihi, M. Habibi, M. Eslamian, Effects of Process Parameters on Characteristics of Mixed-Halide Perovskite Solar Cells Fabricated by Single-Step and Two-step Sequential Coating, Nanoscale Research Letters, 11 (2016) 408.
  • M. Habibi, F. Zabihi, M.R. Ahmadian-Yazdi, M. Eslamian, Progress in Emerging Solution-Processed Thin Film Solar Cells– Part II: Perovskite Solar Cells, Renewable & Sustainable Energy Reviews, 62 (2016) 1012-1031.
  • F. Zabihi, M. Ahmadian-Yazdi, M. Eslamian, Fundamental Study on the Fabrication of Planar Perovskite Solar Cells using Two-Step Sequential Substrate Vibration-Assisted Spray Coating (2S-SVASC), Nanoscale Research Letters, 11 (2016) 71.
  • M. Habibi, A. Rahimzadeh, M. Eslamian, On Dewetting of Thin Films due to Crystallization (Crystallization Dewetting), European Physical Journal E, 39 (2016) 30.
  • Q. Wang, M. Eslamian, Improving Uniformity and Nanostructure of Solution-Processed Thin Films using Ultrasonic Substrate Vibration Post Treatment (SVPT), Ultrasonics, 67 (2016) 55-64.
  • Q. Wang, Y. Xie, F. Soltani-Kordshuli, M. Eslamian, Progress in Emerging Solution-Processed Thin Film Solar Cells– Part I: Polymer Solar Cells, Renewable & Sustainable Energy Reviews, 56 (2016) 347–361.
  • M. Habibi, M. Eslamian, F. Soltani-Kordshuli, F. Zabihi, Controlled Wetting/Dewetting Through Substrate Vibration-Assisted Spray Coating (SVASC), Journal of Coatings Technology and Research, 13 (2016) 211-225.
  • M. Eslamian, F. Zabihi, Ultrasonic Substrate Vibration-Assisted Drop Casting (SVADC) for the Fabrication of Photovoltaic Solar Cell Arrays and Thin-Film Devices, Nanoscale Research Letters 10 (2015) 462.
  • Q. Wang, M-R. Ahmadian-Yazdi, M. Eslamian, Investigation of Morphology and Physical Properties of Modified PEDOT: PSS Films via In-Situ Grafting Method, Synthetic Metals, 209 (2015) 521-527.

Professional Service

  1. Reviewer for International Journal of Thermal Sciences, Microgravity Science and Technology, Journal of Aerosol Science, Aerosol Science and Technology, Drying Technology, Pharmaceutical Research, Journal of Nanoparticle Research, Powder Technology, Chemical Engineering Science, International Journal of Heat and Mass Transfer, Materials Letters, Fluid Dynamics and Materials Processing, Canadian Journal of Chemical Engineering, Energy Conversion and Management, Applied Mathematical Modeling, Fuel, Optics and Lasers in Engineering, Energies, Microfluidics and Nanofluidics, Computer Physics Communications, Applied Thermal Engineering, Czech Science Foundation, etc.
  2. Member of the Scientific Committee of the Fifth and Sixth International Conference on Thermal Engineering, 2010, 2012.  

Courses

  1. Advanced Fluid Mechanics, Vm 520
  2. Selected Topics in Nanotechnology, Ve/Vm 506
  3. Fluid Mechanics, Vm 320
  4. Thermal-Fluid Systems Design, Vm 421
  5. Undergraduate Research Course, Vm 490

Research

  • Micro and Nano Energy Conversion and Transport: Thin film solar cell fabrication and modeling, Heat transfer and thermodiffusion in nanofluids and complex mixtures, Micro and nano-particle fabrication and modeling

Professional Membership

  • Professional Engineers Ontario (PEO)
  • Canada American Physical Society (APS)